• Marketing : Aini : 081210634959
  • Senin, 04 Januari 2016

    Mesin Las Pipa HDPE | Mesin Penyambung Pipa HDPE




    MESIN LAS PIPA HDPE | TYPE MESIN LAS PIPA HDPE

    Seperti yang sudah saya bahas di postingan sebelumnya mengenai Teknik penyambungan pipa hdpe  yang dapat dilakukan dengan tiga cara yaitu :
    1.    Butt Fusion Joint
    2.    Electro Fusion Joint
    3.    Compression Fitting Joint
    Dalam postingan saya kali ini akan menjelaskan mengenai type atau jenis-jenis alat penyambung pipa hdpe  dengan cara Butt Fusion joint / pengelasan.

    Cara penyambungan ini biasa nya menggunakan Alat Penyambung Pipa HDPE atau Welding mesin HDPE Pipe dengan cara kedua ujung pipa dipanaskan sampai derajat yang telah di tentukan kemudian disambung menggunakan alat penyambung pipa hdpe tersebut.

    Sistem penyambungan ini biasa dilakukan untuk pipa dengan diameter 63mm atau 2 inch keatas.

    MESIN LAS PIPA HDPE | TYPE ALAT PENYAMBUNG PIPA HDPE


    Berikut saya jelaskan satu per satu spek dan kegunaan dari mesin las pipa hdpe.

     
     A. MANUAL

    1.
    Mesin Las pipa HDPE type A2SHDS 160 ( Hand Push, Two Clamp )


      

    Mesin las Pipa hdpe
    A2SHDS160

    Mesin las pipa HDPE Type A2SHDS160 Manual 2 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 50mm ( 1 ½ inc )
    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc ) 
     Mesin type ASHDS160 ini terdiri dari :
    • Heating Plate
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp 
    Technical Parameters

     Model
    A2SHDS160
    Pipe size(mm)
    50,63,75,90,110,125,140,160
     Heating plate max. temp.
    270
     Temp. deviation in surface(170~250)
    ±7
    Working voltage
    220V50Hz
    Heating plate power
    1.5KW
    Planing tool power
    0.7KW
    Total power
    2.2KW
    Weight
    ≈46Kg
     Packing
    Cases
    2 Plywood Cases
    Volume
    0.39CBM




    2. Mesin Las pipa HDPE type A4SHDS160 ( Hand Push, Four Clamp )

    Mesin las pipa hdpe
    A4SHDS160

    Mesin las pipa HDPE Type A4SHDS160 Manual 2 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    Mesin type A42SHDS160 Manual 4 clamp terdiri dari :
    • Heating Plate
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
    Technical Parameters

    Model
      A4SHDS160
     Pipe size(mm)
      63,75,90,110,125,140,160
     Heating plate max. temp.
      270
     Temp. deviation in surface(170~250)
      <±7
     Working voltage
      220V50Hz
     Heating plate power
      1.5 KW
     Planing tool power
      0.7 KW
     Total power
      2.2 KW
     Weight
      57 Kg
     Packing
    Cases
      2 Plywood Cases
    Volume
           0.6CMB


     3. Mesin Las pipa HDPE type A4SHDS160 ( Hand Wheel, Four Clamp )
    mesin las pipa hdpe
    B4SHDS160


    Mesin las pipa HDPE Type B4SHDS160 Manual 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    Mesin type B4SHDS160 Manual 4 clamp terdiri dari :
    • Heating Plate
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp

    Technical Parameters:

           Model
    B4SHDS160
    Pipe size(mm)
    50,63,75,90,110,125,140,160
     Heating plate max. temp.
    270
     Temp. deviation in surface(170~250)
    ≤±7
    Working voltage
    220V50Hz
    Heating plate power
    1.5KW
    Planing tool power
    0.7KW
    Total power
    2.2KW





    4. Mesin Las pipa HDPE type A4SHDS200 ( Hand Push, Four Clamp )
    mesin las pipa hdpe
    A4SHDS200



    Mesin las pipa HDPE Type A4SHDS200 Manual 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    • 180mm (7 inc)
    • 200mm (8 inc)
    Mesin type A4SHDS200 Manual 4 clamp terdiri dari :
    • Heating Plate
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
     Technical Parameters 

    Model
      A4SHDS200
     Pipe size(mm)
     63,75,90,110,125,140,160,180,200
     Heating plate max. temp.
      270
     Temp. deviation in surface(170~250)
      ≤±7
     Working voltage
      220V50Hz
     Heating plate power
      1.5KW
     Planing tool power
      0.7KW
     Total power
      2.2KW


    5. Mesin Las pipa HDPE type B4SHDS200 (  Hand Wheel, Four Clamp )
    mesin las pipa hdpe
    B4SHDS200



    Mesin las pipa HDPE Type B4SHDS200 Manual 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    • 180mm (7 inc)
    • 200mm (8 inc)
    Mesin las pipa HDPE type B4SHDS200 Manual 4 clamp terdiri dari :
    • Heating Plate
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp

     Technical Parameter
    Model  B4SHDS200
     Pipe size(mm)  63.75.90,110,125,140,160,180,200
     Heating plate max. temp.  270℃
     Temp. deviation in surface(170~250℃)  <±7℃
     Working voltage  220V、50Hz
     Heating plate power  1.5KW
     Planing tool power  0.7KW
     Total power  2.2KW
     Weight  ≈71kg
     PackingCases      2 Plywood Cases
    Volume  0.9CBM

    B. HYDRAULIC

    1. Mesin las pipa hdpe | type SHD160

    mesin las pipa hdpe
    SHD160

    Mesin las pipa HDPE Type SHDS160 Hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :

    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    Mesin type SHDS160 Hydraulic 4 clamp terdiri dari :

    • Heating Plate
    • Hydraulic Unit
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
     Technical Parameters:

    Model
    SHD160
    Pipe size (mm)
    63、75、90、110、125、140、160
    Heating plate max. temp..
    270℃
    Temp. deviation in surface (170~250℃)
    ≤±7℃
    Pressure adjustable Ranges
    0-6.3Mpa
    Working voltage
    220V、50Hz
    Heating plate power
    1.5KW
    Planing tool power
    1.1KW
    Hydraulic unit power
    0.75KW
    Total power
    3.35KW
    Weight
    106Kg
    Packing
    Cases
    3PlywoodCases
    Volume
    0.58CBM


     2. Mesin las pipa hdpe type SHD 250/90


    mesin las pipa hdpe
    SHD250


    Mesin las pipa HDPE Type SHDS250 hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :

    • 63mm ( 2 inc )
    • 75mm ( 2 ½” inc )
    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    • 180mm ( 7 inc )
    • 200mm (8 inc)
    • 225mm (9 inc)
    • 250mm (10ich)

    Mesin type SHDS250 Hydraulic 4 clamp terdiri dari :
    • Heating Plate
    • Hydraulic Unit
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
    Technical Parameter :

    Model
    SHD250
    Pipe size(mm)
    90,110,125,140,160,180,200,225,250
    Heating plate max. temp.
    270℃
    Temp. deviation in surface (170~250℃)
    ≤±7℃
    Pressure adjustable Ranges
    0-6.3Mpa
    Working voltage
    220V、50Hz
    Heating plate power
    3KW
    Planing tool power
    1.1KW
    Hydraulic unit power
    0.75KW
    Total power
    4.85KW
    Weight
    143Kg
    Packing
    Cases
    3PlywoodCases
    Volume
    0.70CBM


    3. Mesin las pipa hdpe type SHD315/90

    mesin las pipa hdpe
    SHD315

    Mesin las pipa HDPE Type SHD315 Hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :

    • 90mm ( 3 inc )
    • 110mm ( 4 inc )
    • 125mm ( 5 inc )
    • 140mm ( 5 inc )
    • 160mm ( 6 inc )
    • 180mm ( 7 inc )
    • 200mm ( 8 inc )
    • 225mm ( 9 inc )
    • 250mm ( 10 inc )
    • 280mm ( 11 inc )
    • 315mm ( 12 inc )
    Mesin las pipa HDPE type SHD315 Hydraulic 4 clamp terdiri dari :
    • Heating Plate
    • Unit Hydraulic
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
    Technical Parameter : 
    Model
    SHD315
    Pipe size (mm)
    90,110,125,140,160,180,200,225,250,280,315
    Heating plate max. temp.
    270℃
    Temp. deviation in surface (170~250℃)
    ≤±7℃
    Pressure adjustable Ranges
    0-6.3Mpa
    Working voltage
    220V、50Hz
    Heating plate power
    3.5KW
    Planing tool power
    1.1KW
    Hydraulic unit power
    0.75KW
    Total power
    5.35KW
    Weight
    216Kg
    Packing
    Cases
    3PlywoodCases
    Volume
    1.07CBM

    4. Mesin Las pipa hdpe type SHD 450/200

    mesin las pipa hdpe
    SHD450
    Mesin las pipa HDPE Type SHD450 Hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :
    • 200mm
    • 225mm
    • 250mm
    • 280mm
    • 315mm
    • 355mm
    • 400mm
    • 450mm
    Mesin type SHD450 Hydraulic 4 clamp terdiri dari:
    • Heating Plate
    • Hydraulic Unit
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
    Technical Parameter :
    ModelSHD450
    Pipe size (mm)200,225,250,280,315,355,400,450
    Heating plate max. temp.270℃
    Temp. deviation in surface (170~250℃)≤±7℃
    Pressure adjustable Ranges0-6.3Mpa
    Working voltage380V、50Hz
    Heating plate power5.38KW
    Planing tool power1.5KW
    Hydraulic unit power1.5KW


     5. Jual alat sambung pipa hdpe type SHD 500/250


    mesin las pipa hdpe
    SHD500


    Mesin las pipa HDPE Type SHD500 Hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :

    • 200mm
    • 225mm
    • 250mm
    • 280mm
    • 315mm
    • 355mm
    • 400mm
    • 450mm
    • 500mm
    Mesin type SHD500 Hydraulic 4 clamp terdiri dari :
    • Heating Plate
    • Hydraulic Unit
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
     Technical Parameters:
    Model
    SHD500
    Pipe size (mm)
    200, 250, 280, 315, 355, 400, 450. 500
    Heating plate max. temp.
    270℃
    Temp. deviation in surface (170~250℃)
    ≤±7℃
    Pressure adjustable Ranges
    0-6.3Mpa
    Working voltage
    380V、50Hz
    Heating plate power
    5.38KW
    Planing tool power
    1.5KW
    Hydraulic unit power
                                               1.5KW

     6. Mesin las pipa hdpe type SHD 630/315
    Mesin las pipa hdpe
    SHD630



    Mesin las pipa HDPE Type SHD630 Hydraulic 4 Clamp direkomendasikan untuk Menyambung pipa hdpe dan fitting HDPE dengan detail ukuran :

    • 315mm
    • 355mm
    • 400mm
    • 450mm
    • 500mm
    • 560mm
    • 630mm
    Mesin type SHD630 Hydraulic 4 clamp terdiri dari :
    • Heating Plate
    • Hydraulic Unit
    • Basic Frame
    • Planing Tool
    • Heating plate conection
    • Clamp
    Technical Parameter :
    ModelSHD630
    Pipe size (mm)315,355,400,450,500,560,630
    Heating plate max. temp.270℃
    Temp. deviation in surface (170~250℃)≤±7℃
    Pressure adjustable Ranges0-6.3Mpa
    Working voltage380V、50Hz
    Heating plate power9.35KW
    Planing tool power1.5KW
    Hydraulic unit power1.5KW

    Untuk informasi lebih lanjut mengenai type dan harga mesin SHDS/SHD
    silahkan hubungi kami :


    PT. MUTIARA TIGA BERLIAN
    Head Office : Jl. D.I. Panjaitan No. 7 Jatinegara
    Jakarta Timur 13410
    Phone : 021 - 8590 9122
    Gudang : Jl. Sepakat 1 Cilangkap, Cipayung, Jakarta Timur  

    Attn       :  Nur'Aini
    WA        :  0812 1063 4959
    Pin BB  :  58250BA3 
    Email    :  aini.hdpe.shd@gmail.com
                     nuraini.mtb94@yahoo.com




    fitting hdpe

    Author & Editor

    Has laoreet percipitur ad. Vide interesset in mei, no his legimus verterem. Et nostrum imperdiet appellantur usu, mnesarchum referrentur id vim.

    0 komentar:

    Posting Komentar